NSK VR-EB Manual De Operación página 7

4. Connecting and Disconnecting the Handpiece from the Motor
4-1 Connecting
1) Insert the handpiece direct into the motor (Fig. 1). When
connecting an optic handpiece, turn the handpiece until it clicks
and locks into position.
2) Confirm that the handpiece is securely connected to the motor.
4-2 Disconnecting
Hold the motor and the handpiece, then pull apart.
CAUTION
Do not connect or disconnect the handpiece until the motor has completely stopped.
Connect ONLY to E type motors (ISO 3964 (EN ISO 3964)).
6
Insertion Area
Handpiece Motor
Fig. 1