universalblue UVT1300-20 Manual De Instrucciones página 36

Unscrew the screw allocated in the upper part of the lamp
structure (B) and place the support rod (E) together with the
upper canopy (D). Fix the lamp structure (B) with the support rod
(E) using the screw removed previously. The connecting cables
should be run through the inside of the support rod (E) to the
opposite end.
Assembling the fan to the wall
Unscrew the side screws of the receiver bracket (G) as shown in
the figure below.
Make the necessary holes in the wall so that the receiver bracket
(G) can be fixed to the ceiling. Note the previously listed
annotations referring to roof types.
Place the assembled fan in the semi-circle of the receiver
bracket (G) matching the slit of the hemisphere and the receiver
support (G).
36