EAS ELECTRIC ECRL120P Manual De Instrucciones página 49

9. OPERATION
Remote signal receiving function
The wired remote controller can be a remote signal receiving device, you can
use the wireless remote controller to control the air-conditioner through the
wired remote controller when the system have been powered on.
To start/stop operation
POWER
To set the operation mode
Operation mode setting
MODE
Room temperature setting
Lower Raise
Press the POWER button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the MODE button to set the operation mode.
(Heat function is invalid for cool only type unit)
Press the button" + "or " - " to set the room
temperature.
Indoor Setting Temperature Range:
17~30℃(62~86℉/62~88℉(Depending on models)).
50
V.2