Assembly; Battery Installation; Operation - Tineco PURE ONE S15 PRO Serie Manual De Uso

8. Flexible extension hose
Excellent extension and flexibility to access
hard-to-reach spaces; perfect for in-care use.
Compatible with all non-motorized Tineco
accessories.
9. Hair cleaning tool
Use the end with the small blade to remove
hair and debris wrapped around the roller.
Use the end with the brush to clean the brush
window, and the dustbin, as required.
Fig.B

ASSEMBLY

Tube Installation
• Insert tube.
Fig.C-1
• Insert to the main body.
Fig.C-2
• Press the release button to remove the tube.
Fig.C-3
Brush Installation
• Insert the power brush.
Fig.C-4
• Press the release button to remove the power
brush.
Fig.C-5

Battery Installation

• Press the battery release button, and remove
the battery.
Fig.C-6
• To install, slide the battery into the slot at the
base of the main body. The battery will click
into position when correctly fitted.
Fig.C-7
Charging Dock Installation
• Lift up the charging post to the upright
position.
Fig.C-8
• Press hard to fix the charging post firmly on the
dock.
Fig.C-9
• For easy storage, pull up the charging post and
then press down.
Fig.C-10

OPERATION

Preparing for Use
Note:
• Before the first use, please charge the
appliance (see "Charging the Battery") for
3-4 hours in an area where the ambient
temperature is between 39.2°F (4°C) and 104°F
(40°C).
• Select an accessory and attach it to the
appliance before use (see "Accessories").
1.Press the button to activate the suction.
Press it again to turn off the appliance.
Fig.D-1
2.The appliance will start in AUTO mode by
default. Press the
AUTO and MAX mode. Swipe the power
control slider to switch to Manual mode.
Fig.D-2
3.Place the appliance and attachments on the
charging dock for convenient storage after use.
Fig.D-3
Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the iLoop sensor automatically
detects how dirty the surface is and applies the
appropriate suction power.
• A red dust monitoring loop indicates more dust
is detected whereas a blue loop indicates less
is detected. This mode automatically provides
the best cleaning solution.
Fig.D-4
MAX Mode
• In AUTO mode, press the
MAX mode.
11
button to switch between
button to enter