Levelling The Washing Machine - Infiniton WM-D89 Manual De Usuario

INSTALLATION
Remove transport bolts
！
Warning!
You must remove the transport bolts from the backside before using the
product.
Loosen the 4 transport
bolts with a spanner.

Levelling the washing machine

！ Warning!
The lock nuts on all four feet must be screwed tightly against the
housing.
Connect the water supply hose
！ Warning!
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Remove the bolts
including the rubber parts
and keep them for future
use.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level
and steady.
Connect the water supply hose to
the water inlet valve and a water
tap with cold water as indicated.
11
Close the holes using the
cover caps.