Safety Recommendations - S&P DECOR DESIGN Serie Instrucciones De Montaje

ENGLISH
EN
DECOR DESIGN
Axial Extractor Fans
This instruction manual contains im-
portant information and must be read
carefully by competent persons prior to
any handling, transport, inspection or
installation of this product. Every care
has been taken in the preparation of the
instructions and information; however,
it is the responsibility of the installer to
ensure the system complies with relevant
national and international regulations,
especially safety. The manufacturer, Sol-
er & Palau Sistemas de Ventilación S.L.U.
accepts no responsibility for breakages,
accidents or any inconvenience caused
by failure to comply with the instructions
contained in this manual.
The fans referred to in this manual have
been manufactured in accordance with
rigorous quality control and International
standard ISO 9001.
We recommend you to check the follow-
ing points when you receive this extrac-
tor:
1. Make sure you have received the right
model
2. Make sure that the data on the name-
plate are appropriate to your needs:
voltage, frequency, speed, etc.
Once the product has been installed, this
manual to be retained by the end user.
14
SAFETY
RECOMMENDATIONS
The installation must
be carried out in ac-
cordance with current
regulations in each
country. The installa-
tion must be carried
out by a qualified pro-
fessional.
The electrical instal-
lation must
porate an omnipolar
switch with an open-
ing between contacts
of at least 3 mm, ap-
propriate for the load
and complying with
current standards.
In bathrooms, the de-
vice must be installed
outside the reach of
any person taking a
incor-