Alarms Display And Reset - Casals QUANTICA EEC Manual De Instalación, Operación Y Mantenimiento

SET-POINT CONSTANT FLOW RATE (m
SET-POINT CONSTANT PRESSURE (Pa)
To change the parameter:
• press the "SET" key, the value blinks;
• press the "UP" or "DOWN" keys to change the parameter;
• confirm with "SET" key.
Pressing the "DOWN" key scroll through the various parame-
ters until you reach the DISPLAY backlight setting screen.
TIME (in seconds) TO KEEP THE DISPLAY BACKLIGHT ON
(0 = always OFF / 241 = always ON)
Default value = 30 sec.
To change the parameter:
• press the "SET" key, the value blinks;
• press the "UP" or "DOWN" keys to change the parameter;
• confirm with "SET" key.
USER MENU PASSWORD
(0 = PSW not required for the access)
• press the "SET" key, the value blinks;
• press the "UP" or "DOWN" keys to change the parameter;
• confirm with "SET" key.
x 4 TIMES
/h / 10)
3

18.2 Alarms display and reset

When there is an alarm which requires an immediate unit
STOP, the unit will turn off showing the OFF alarm screen.
When an alarm appears it blinks the icon of the TRIANGLE
with the exclamation point in the centre.
screen, press the "ON / STAND-BY" key (simple pressure) to
have access to the ALARM PAGE.
Pressing the "SET" key alarms will be displayed. If there are
no alarms will appear "NO ALARM" screen.
If there are more of one active alarms, they can be displayed
by pressing "UP" or "DOWN" keys. If the cause of the alarm
is not correctly reset, the alarm will be displayed once again.
EN
From the main
45