Intended Use For The Tile Cutter; Safety Instructions; General Safety Rules - Dexter 800ETC1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19

1. INTENDED USE FOR THE TILE CUTTER

FR
The tile cutting machine is designed for standard cutting of small and medium-size tiles (glazed tiles,
ceramic tiles or similar) which can be accommodated by the size of the machine.
ES
It is designed for DIY applications and craft businesses in particular.It should never be used for cutting
wood or metal.
The machine should be used exclusively for its intended purpose.
PT
Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be held liable for damage and/or injuries of any kind
that result from such misuse.
IT
The machine is to be operated only with suitable cutting wheels.
Saw blades should never be used. Intended use also includes complying with the safety information,
the assembly instructions and the operating instructions contained in the operating manual.
EL
All persons who use and service the equipment must be acquainted with these operating instructions
and must be informed about the equipment's potential hazards.
PL
In addition, strict compliance with the accident prevention regulations in force in your area, as well as
all other general rules on health and safety at work, is imperative.
UA
Even when the equipment is used as prescribed it is still impossible to eliminate certain residual risk
factors.
RO
The following hazards may arise as a result of the machine's construction and design:
• Contact with the diamond cutting wheel where it is not covered.
EN
• Reaching into the diamond cutting wheel while it is rotating.
workpieces.
• Damage to hearing if ear-muffs are not used.
• It is advisable to avoid contact with the rotating parts.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

2. SAFETY INSTRUCTIONS

2.1 GENERAL SAFETY RULES

Keep all safety instructions and information for future reference!
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
WARNING ! Read all safety warnings, instructions,
Failure to follow all instructions listed below may result in electric
on of workpieces and parts of
117

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20035.1

Tabla de contenido