Maintenance - Maxvac DV20-MB Instrucciones De Uso Y Mantenimiento

Insert the sleeve of the flexible hose in the air inlet connector (R) and the adapter
(U) in the dust conveyor of the electric power tool.
R
Plug in the power tool, then the vacuum. With the cable clamp, fix the cable of the
electric power tool to the flexible hose.
Turn on the appliance.
24 DV 20 | 35 | 50 MB
U
U
MAX-VAC.COM

MAINTENANCE

Always unplug the appliance from the power supply before
cleaning or servicing the filter system in any way.
FILTER CARTRIDGE
To manually start the "Self-cleaning filter"
function, press the orange switch (E) for
maximum 15÷20 seconds.
Then release the switch (E) for 15 seconds;
the coil must cool down.
The coil that activates the "Self-Cleaning
filter" system is fitted with a thermal
protection switch.
Continuous system operation for more
than 60 seconds may cause the thermal
protection switch to trip.
The system resets after about 20 minutes.
Switch "A" to "MANUAL"= Self-cleaning
Filter function not active (see page 20)
DV 20 | 35 | 50 MB
E
B
ON
OFF
MAX-VAC.COM 25