Auger Calibration; Fan Calibration; Heating Management - Vertex Life GAIA HIDRO 16 Manual De Instrucciones

5.2.1.2. AUGER CALIBRATION

Enter the pellet loading speed settings with P3. Use P4 and P6 to reduce the pellet
loading speed or adjust the acceleration values on the display (+7...0...-7). Use P3 to
save. Use P1 ESC to exit the menu.

5.2.1.3. FAN CALIBRATION

Enter with P3 button to control the fan speed. Use P4 and P6 to reduce the speed of the
chimney fan or set acceleration values on the screen (+7...0...- 7 ) . Use P3 to save. Use
P1 ESC to exit the menu.

5.2.2. HEATING MANAGEMENT

Press P3 button to enter submenu. You can re-enter the Heating management menu
with the P3 button. The boiler thermostat, heat output and summer-winter menus are
available in the Heating Management menu.
17