Mainstays MS17-D1-1011-01 Manual De Instrucciones página 21

Long screw
Short screw
Wall
Metal bracket
Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8" drill bit.
22. With assistance, position the unit at the desired location against a wall.
23. Now, follow the instructions printed on the plastic bag containing the tipping restraint hardware to
attach the tip-over restraints to the unit and the wall.
NOTE:
The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a
wall stud. Depending upon your wall construction, different anchor hardware may be required. Please contact
your local hardware store for assistance. Young children can be seriously injured by tipping furniture. You must
install the tipping restraint hardware with the unit to prevent the unit from tipping, causing any accidents or
damage. The tipping restraints are intended only as a deterrent, they are not a substitute for proper adult
supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of
earthquake restraints, they must be purchased and installed separately.
Assembly Instructions
1
Wall
2
Wall
3
4a
Connector
4
Steel cable
Wooden stud
Wall
21