Design - GOK Caramatic DriveTwo Instrucciones De Montaje Y Funcionamiento

Inlet
Outlet
Connection
Test connection

DESIGN

Screw aid SW 23
Nose indicating the withdrawal
direction on the rotary knob
Rotary knob for the operation of
reserve cylinder
Inlet connections
Outlet connection
Assembly board (elbow)
Connection for Eis-Ex regulator heating (without figure)
20 / 170
Trading name and dimensions
acc. to standard
Male thread connections
• G.13 = thread M 20 x 1.5
Trading name and dimensions
acc. to standard
Compression fitting RVS
• H.9 = compr. fit 8 or compr. fit 10
Commercial name and dimension
Test hose G 1/4 lh nut x adapter for
test device x 750 mm
horizontal version vertical version
Sealing nut with strap on inlet connection
Operation and reserve cylinder display
(green/red) visual indicator type AUV
Breather for the PRV (without figure)
Test connector with screw cap
Check valve with cap
Green push button on the crash-sensor-
pendulum
Caramatic DriveTwo
Installation notes
Tightening torque:
Coupling nut =
4 to 5 Nm
Installation notes
Installation notes
M11x1-UEM/PV
with female thread
Artikel-Nr. 71 825 50 a