Range Master RMR-2250 Manual Del Usuario página 11

Assembly instructions
STEP 3
Insert Bolts (1) through the Large Metal
Washers (9), Bottom Bowl (B), Leg Bowls
(L) and thread into the Stationary Legs
(G). Repeat this process to attach the
Wheel Legs (H) to the Bottom Bowl (B).
STEP 4
Align the leg holes with the ends of the
Wire Shelf (K). Slide the longer threaded
ends of the Wire Shelf through the holes
in the Wheel Legs (H). Slide the Plastic
Washers (11) and Wheels (J) over the
ends of the Wire Shelf. Thread Wheel
Lock Nuts (7) onto the Wire Shelf ends
and partially tighten. Slide the shorter
Wire Shelf ends through the holes in the
Stationary Legs (G) and Plastic Washers
(11). Then thread Wheel Lock Nuts (7)
onto the Wire Shelf ends. Check align-
ment of legs, noting that the holes on the
Stationary Legs for the Condiment Rack
should face inward, and securely tighten
the Wheel Lock Nuts (7) with an adjust-
able wrench.
11