Range Master RMR-2250 Manual Del Usuario página 12

Assembly instructions
STEP 5
To attach the Upper Right Hinge (N) and
Upper Left Hinge (O), insert the Hinge
Bolts (3) through the Metal Washers (8),
Upper Hinge, Top Lid (A) and Fiber
Washers (10). Thread the Wing Nuts
(14) onto the Hinge Bolts. To attach the
Lower Right Hinge (Q) and Lower Left
Hinge (P), insert the Hinge Bolts (3)
through the Metal Washers (8), Lower
Hinge, Bottom Bowl (B) and Fiber
Washers (10). Thread the Hinge Nuts
(6) onto the Hinge Bolts.
Note: hinges should point straight back
when assembled correctly.
STEP 6
Align holes in the Upper and Lower
Hinges by placing the Top Lid (A) on top
of the Bottom Bowl (B). Note that the
Upper Hinges should fit inside of the
Lower Hinges. Insert Hinge Pins (12)
through aligned holes in both hinges.
Insert Cotter Pins (13) through holes at
the end of each Hinge Pin.
12