Assembly
Parts
NO.
Q'TY LENGTH Picture
1
8
995
2
8
695
3
8
620
4
8
5
4
6
4
1) 995mm tube
2) 695mm tube
4) middle connector
5) top corner connector
6) bottom corner connector(with suction cup)
3) 620mm tube
03
1. Insert the tubes into the fabric
and connect the tubes with the
middle plastic connector.
Then connect four side tubes with
the corner plastic connector.
3. Insert the stand tube into the
fabric, and connect with the plastic
connector.
2. The fully assembled bottom is as
shown.
4. Install top rail tubes of four sides
and connect with the plastic
connector. (Note that the side with
zipper should be assembled at the
last step.)
04