Starting The Machine; Battery Compartment; Operating Tips - sunjoe 24V-SS12-XR Manual Del Operador

Operation
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.

Starting the Machine

1. Slide the battery down in the battery compartment until it
clicks to lock it into position (Fig. 6).
Fig. 6
Battery
2. To start the cordless snow shovel, push and hold the
safety lock switch on the side of the handle grip with your
thumb and then squeeze the trigger switch with your
fingers. Once the machine powers on, you can release the
safety lock switch and proceed with operation (Fig. 7).
Fig. 7
Safety switch
On/off trigger
switch
3. To stop the cordless snow shovel, release the trigger
switch.
Battery
compartment
Auxiliary Handle Adjustment
To adjust the angle of the auxiliary handle, follow the
instructions below:
1. Stop the machine and remove the battery. Wait until the
blade comes to a complete stop.
2. Loosen the auxiliary handle by turning the handle knob
counterclockwise. Rotate the auxiliary handle to a
comfortable position (Fig. 8).
Auxiliary handle
Handle knob
Fig. 8
3. Fix the handle by tightening the handle knob. Insert the
battery and resume working.

Operating Tips

• Start the cordless snow shovel. Push the shovel forward
at a comfortable rate, yet slow enough to clear the path
completely. The clearing width of the snow shovel and the
depth of snowfall should dictate your forward speed.
• Direct the snow discharge to the right or to the left using
the angle control lever. Turn it right to go left and turn it left
to go right (Fig. 9).
Fig. 9
Angle control lever
Vanes
8