Thuasne SLEEQ MAX Instrucciones De Uso página 5

5.0 Modifications (Continued)
5.2
BACK PANEL REMOVAL FOR MODIFICATION:
(1) Open cover at the base of the back panel. (2) Lift cover. (3)
Remove the LSO assembly. (4) Remove plastic panel.
6.0 Reset
When removing the brace, always replace Pull Tabs
J
both Wings outward to reset the tightening mechanism (6.2).
6.2
5.3
ADJUST FOR OVER THE SHOULDER OR UNDER
AXILLA STRAPPING OPTION
Detach Strap Anchor
over the shoulder (A) or down for under axilla
strap placement (B).
D
to ready position (6.1). Lay brace on a flat surface then pull
6.2
5
N and reposition up for