Koshin PBX Serie Manual De Uso página 2

Ocultar thumbs Ver también para PBX Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DANGER
DANGER
WARNING
WARNING
CAUTION
CAUTION
DANGER
WARNING
CAUTION
RESTRICTIONS
1) Make sure that the liquid in which the pump is used meets the following conditions.
Temperature: 5–40°C (41–104F°)
Viscosity: <5cP
pH: 6.5–8.0
(Do not use the pump in liquid that is combustible, flammable, or volatile, or with liquid
containing oil, pharmaceuticals, salt, strong alkali, or strong acid.)
2) Make sure that power supply meets the following conditions.
Voltage: ±10%
If both the voltage and frequency fluctuate, the power supply must be within half of these
tolerances.
Do not use this pump with combustible, flammable, or volatile liquids.
● Make sure to ground the pump properly. There is a risk of electric
shock.
● Repairs and disassembly should be undertaken only by someone who
understands the structure of the pump.
* Contact your dealer for information about the structure.
● Do not touch the power plug with wet hands.
● Do not use the pump in an area accessible to people or animals.
● Set up a separation barrier to ensure that children, or people not of
sound mind or body cannot come in contact with the pump.
● Have any power supply equipment and piping installation carried out
by a professional service provider.
● Disconnect the power plug when cleaning or inspecting the pump.
● Do not put your hand or finger inside the unit.
● This product is for use with sandy water.
If the pump is used with any liquid other than sandy water or fresh
water, it will not be covered by the warranty.
* Fresh water refers to water-supply water, well-water with no heavy
filth (such as silt, clay, heavy mud).
* Sandy water refers to dirty water that does not contain heavy filth.
● Do not drop the pump or put it anywhere close to fire.
● Check regularly to make sure that the power cord and plug are not
damaged, the power socket is not distorted, and there is no dust on or
around the power plug.
Do not use the pump if there are any abnormalities.
● Do not move the pump while it is operating. After use, always make
sure to disconnect the power plug before lifting the pump out of the
water.
● If the product does not operate, or if there is any abnormality,
immediately disconnect the power plug and request an inspection and
repair from your dealer.
Frequency: ±1%
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pbx-55022Pbx-55011Pbx-65011Pbx7-55022Pbx7-55011Pbx7-65011

Tabla de contenido