Poolex SILVERLINE Manual De Usuario Y De Instalación página 42

! !
PLEASE READ CAREFULLY.
These installation instructions are an integral part of the product.
They must be given to the installer and retained by the user.
If the manual is lost, please consult the website:
www.poolex.fr
The instructions and recommendations contained in this manual should be read carefully and understood
since they provide valuable information concerning the heat pump's safe handling and operation. Keep this
manual in an accessible place for easy future reference.
Installation must be carried out by a qualified professional person in accordance with current regu-
lations and the manufacturer's instructions. An installation error may cause physical injury to persons or
animals as well as mechanical damage for which the manufacturer can under no circumstances be held
responsible.
After unpacking the heat pump, please check the contents in order to report any damage.
Prior to connecting the heat pump, ensure that the information provided in this manual is compatible with
the actual installation conditions and does not exceed the maximum limits authorised for this particular
product.
In the event of a defect and/or malfunction of the heat pump, the electricity supply must be discon-
nected and no attempt made to repair the fault.
Repairs must be undertaken only by an authorised technical service organisation using original replace-
ment parts. Failure to comply with the above-mentioned clauses may have an adverse effect on the heat
pump's safe operation.
To guarantee the heat pump's efficiency and satisfactory operation, it is important to ensure its regular
maintenance in accordance with the instructions provided.
If the heat pump is sold or transferred, always make sure that all technical documentation is transmitted
with the equipment to the new owner.
This heat pump is designed solely for heating a swimming pool. Any other use must be considered as being
inappropriate, incorrect or even hazardous.
Any contractual or non-contractual liability of the manufacturer/distributor shall be deemed null and void for
damage caused by installation or operational errors, or due to non-compliance with the instructions provid-
ed in this manual or with current installation norms applicable to the equipment covered by this document.
4