Installation Advices | Blue Ocean's Parts - Osmofilter Blue Ocean Manual De Instrucciones

INSTALLATION ADVICES
- Do not connect the machine to hot water (more than 45 ºC)
- Pressure must be between 3 Kg/cm² and 5 Kg/cm²
- The equipment can handle a maximum salinity of 2.000 ppm
- The room temperature where the equipment is installed must be between 4ºC and
45ºC.
- Before using the equipment, it is recommended to complete two system drainages, as well
as disinfect it.
- If the machine is going to be inactive for a period of time, it is recommended to shut off
the water supply and empty the device. Upon your return, open the water supply and
make two complete emptyings of the system.
- If you want to use R.O. water with another tap, fridge etc, you must use a plastic tube
(ref. RO2001) because a metal pipe would give a bad taste to the water.
BLUE OCEAN's PARTS
8
1. Room temperature water faucet.
2. Cold water faucet.
3. Cold water button.
4. Carbon GAC cartridge.
5. Carbon GAC cartridge.
6. Sediment cartridge.
7. Membrane Housing and membrane.
1 2
3
4
9
5
10
6
11
7
12
13
Top
8. Carbon GAC post-filter.
9. High switch.
10. Flow restrictor.
11. Low switch.
12. Fuse.
13. Cold water thermostat.
14. Solenoid valve.
18
Bottom
04
13
14
15
16
17
15. Radiator + fan.
16. Pressure pump.
17. Compressor.
18. Tank.