Malfunctions - JAC EASYFORM Traducción Del Manual De Uso Original

10. MALFUNCTIONS

Problem
Check
Check tank cleanliness.
Check the condition of the racks and pinions.
Tamping / cutting lever difficult to operate
Check the condition of the mechanism in the machine.
Check the plate alignment relative to the tank edges.
Check to ensure that the Click&Cut frame is in proper
Poor dough piece cutting
contact with the tank.
Check the grid blades for appearance and cleanliness.
Retighten the friction disc pressure screws (fig4).
Tamping plate drops down again of its own
NB: this operation must be carried out with the tamping
accord
plate raised: pinch point hazard.
Should the problem persist, please contact your technician.
10 V1-06-2022