Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
OPERATING PARAMETERS
Functioning of the stove is determined by the Power, Ventilation and Temperature parameters set by the
user.
2.1
Use of the control panel
•
Use the
arrow keys to move between the different menus that light up from time to time.
•
Hover over a specific function and press the
•
Pressing the key
•
In general, all flashing values can be changed using the
•
The
"cancel" key discards the change; if it is pressed and held down, any alarm code or error will
be displayed on the screen.
2.2 Changing the power
The power defines the quantity of heat produced by the stove and therefore also directly affects
consumption.
To change the power:
a) Use the
keys on the power menu
b) The power value will flash; change the value with the
c) Press the
key to confirm the set data.
2.3 Changing the ventilation
To change the value of the ventilation:
a) Use the
keys on the ventilation menu
b) Use the
keys to move between the central fan [c], the right fan [r]* and the left fan [l]*;
a) Press the
key to select the desired fan;
b) By selecting the central fan [c]; modify its value with the
• "OFF" = completely excludes ventilation and the stove will only operate with natural convection;
• "1" minimum,...,"5" maximum;
• "A" = automatic operation (the stove will set the speed according to the room temperature;
• "Hi" = ultra-fast operation (to be used only if there is a need to quickly heat an environment);
c) Press the
key to confirm the data entered.
If the right [r]* or left [l]* rear fans are selected, it is possible to set the OFF and speed values "1" minimum, ...,
"5" maximum.
In the event that the central fan has been set to OFF and at least one of the two rear fans is active, the central
fan will automatically set to the minimum value.
2.4 Changing the room temperature
By changing this value, the desired room temperature is set which is read directly by a probe located on
the stove.
To modify the desired temperature value:
a) Move with the keys
b) The current value will flash; modify it with the
c) Press the
key to confirm the set data.
* Only for PRO2 versions (one rear fan) and PRO3 (two rear fans)
18
again confirms the change.
and press the
to the temperature menu
key to change the values with the
keys.
key;
keys (1 minimum,...,5 maximum)
and press the
key;
keys:
and press the key
keys;
keys.
;
004779080 - 26/08/2022
Publicidad
Tabla de contenido
