Preset - AVer MD330U Serie Manual Del Usuario

Focus
Auto Focus ( ): Click for the camera to perform the auto focus.
): Click to manually adjust the focus. You can use the Focus + and Focus –
Manual Focus (
buttons to adjust the focus.
One Push Focus (
Focus Near Limit: Set up the focus distance limit.

Preset

Click the Preset tab to display the panel below. You can configure and operate the preset positions.
To set up preset positions:
1. Select the Preset tab in live view page.
2. Use , ,
zoom in or zoom out the images.
3. Input a preset number (0~255) in the Save Preset column and click Save to save the position.
4. Follow Step 2 and 3 to set up more preset positions.
To perform the go to preset positions:
1. Input a preset number (0~255) in the Load Preset column or click a preset number (0~19) in the
Quick Call section.
2. Click Load, the camera will move to the preset position.
When operating the go to preset positions, you can optionally adjust the Preset Speed or
enable/disable the Video Freeze while Preset function.
 Preset Accuracy: Enable this function to optimize the positioning accuracy of the setup preset
positions.
 Video Freeze with Preset: When this function is enabled, the camera will not display the view
along the path when moving from one position to another. The camera will only display the view of
the positions.
 Preset Speed: Adjust the preset speed.
): Click to automatically adjust the focus once.
and to navigate the camera view. Optionally use
20
and to