Cleaning The Sensors; Storing Your Robot; Troubleshooting - Bissell SPINWAVE R5 3552N Manual De Instrucciones

Cleaning the Sensors

After repeated use, debris can accumulate on the sensors
of the robot and impact its performance.
Turn the power switch OFF and wipe the sensors with a
cloth to remove any debris.
Sensors and Contacts
1. Cliff Sensors
2. Charging Contact Points
3. Soft Surface Avoidance Sensor

Storing Your Robot

Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged. Store with
clean, dry mop pads. Any solution remaining in the mop tank should be emptied prior to storage.

Troubleshooting

For a comprehensive walkthrough of your product and support tips and videos,
visit support.BISSELL.com.
NOTICE
• To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
• Disconnecting the battery will destroy the appliance and invalidate the warranty.
8 global.BISSELL.com 8
3
1
2 2
1
1