to the adapter.
IMPORTANT: Pull up on the carrycot to check that it is securely locked to the adapter and
that the adapter is securely locked to the stroller before putting your child in it. Always
check that the carrycot is fully assembled before placing the child inside"
R-2. To release the carrycot
Pull the lever back of carrycot gently and lift the carrycot by its handle to detach.
Removing the carrycot adapter by pressing the button on inner side then slid it out.
CAUTION:
• Always make sure the rear of carrycot canopy is securely fastened by the lever and to
the carrycot body.
S. To Install Shop-and-Go bag
Use EASY TWIN 4 carrycot adapter which is separately supplied for attaching Shop-and-Go bag
to your stroller. 1 left piece and 1 right piece are supplied in the package.
Insert carrycot adapter to stroller frame then slip the upper end of carrycot adapter into the
sleeve of your Shop-and-Go bag while sitting the bag on stroller frame.
CAUTION:
• The maximum loading weight of Shop-and-Go is 10 kg (22 lbs.)
• Please put weights evenly in the bag.
• Except for sitting on your Easy Twin 4 stroller, the bag can also be carried with the
handle and shoulder strap. Do not hang it onto stroller handle.
NOTE: Remove the car seat, carrycot or Shop-and-Go bag before folding your stroller.
Care and Maintenance
• Clean the frame, the plastic parts, and the fabric with a damp cloth, but don't use abrasives or
bleach.
• Always allow the fabric to dry naturally away from direct heat.
• Do not use silicone lubricants, as they will attract dirt and grime.
• Continued and extended exposure to sunlight can change the color of many materials.
• Do not store the stroller in a damp place.
• Clean the wheels regularly with water and remove the dirt.
• Lubricate moving parts with a light, non-toxic oil. Be careful not to apply light oil to the wheel
bearings
• To ensure the long-lasting use of the stroller, wipe it off with a soft, absorbent cloth after using
it in rainy weather.
• We do not recommend to use stroller in sand.
• It is normal for fabric to discolor from sunlight and to show wear and tear after a long period of
use, even when used normally.
• Discontinue use if any parts are torn, broken, or missing.
• To clean the armbar or handle, wipe clean with damp cloth and then allow to air dry before
storing.
• DO NOT clean your product with strong cleaners or solvent as it may damage the material.
• DO NOT expose your product to organic solvents like alcohol.
English