Switch Trigger - DUROFIX RV2052-WR8 Manual Información Del Producto

1English1

Switch Trigger

To turn the tool on, squeeze the
trigger switch. To turn the tool
off, release the trigger switch
(see Fig.2).
Fig. 2
Forward / Reverse Lever
A forward/reverse lever determines the direction of the tool and also serves as a lock
off button.
To select forward rotation, RELEASE THE SWITCH (A) (see Fig.3), and push the
forward/reverse lever (B) (see Fig.3) toward left side of the tool.
To select reverse rotation, RELEASE THE SWITCH (A) (see Fig.3), and push the
forward/reverse lever (B) (see Fig.3) toward right side of the tool.
The centre position of the lever locks the tool in the off position.
NOTE: When change the position of the lever, making sure the trigger is released.
NOTE: The lever should be moved in the centre position with no operation.
(B)
(A)
Fig. 3
Install the Bit onto the Hex. Shank
1. Pull out the sleeve as the Fig.4 (A)
2. Insert the bit into the hex. shank as Fig.4 (B), release the sleeve to fix the bit.
English
-8