Accessories; Assembly; Battery Installation - Tineco PURE ONE S15 Serie Manual De Uso

ACCESSORIES

Note:
• Test an accessory on a small, inconspicuous
area before use on sensitive surfaces.
• To identify what should be included with
your purchase, please refer to the "Included
Accessories" located on the packaging box.
• As shown below, there are many components
compatible with this model. If you require more
accessories, please go to www.tineco.com or
store.tineco.com.
1. Anti-tangle LED power brush
Ideal for both hard floors and carpets. Picks up
ground-in dirt with no hair wrap.
2. 2-in-1 dusting brush
Switches between a wide and a soft brush by
pressing the release button. The soft brush is
most effective on hard-surface furniture while
the wide brush is effective for upholstered
furniture, curtains, etc.
3. Crevice tool
For corners, nooks, and other hard-to-reach
places such as around car seats, picture frames,
and cupboards.
4. Soft dusting brush
Angled bristles on a slender, oval-shaped rim
provide anti-static, cushioned contact. Suitable
for dusting shelves, lighting, delicate surfaces,
electronics and more.
5. Flexible long crevice tool
Easy to bend, easy to reach tight spots.
Suitable for cleaning dust behind and beneath
furniture, around refrigerators, and many other
tight gaps.
6. Multi-angle folding tube
An articulated joint makes it adjustable to allow
for flexibility when cleaning from high to low.
7. Flexible extension hose
Excellent extension and flexibility to access
hard-to-reach spaces; perfect for in-care use.
Compatible with all non-motorized Tineco
accessories.
8. Hair cleaning tool
Use the end with the small blade to remove
hair and debris wrapped around the roller.
Use the end with the brush to clean the brush
window, and the dustbin, as required.
Fig.B

ASSEMBLY

Tube Installation
• Insert tube.
Fig.C-1
• Insert to the main body.
Fig.C-2
• Press the release button to remove the tube.
Fig.C-3
Brush Installation
• Insert the power brush.
Fig.C-4
• Press the release button to remove the power
brush.
Fig.C-5

Battery Installation

• Press the battery release button, and remove
the battery.
Fig.C-6
• To install, slide the battery into the slot at the
base of the main body. The battery will click
into position when correctly fitted.
Fig.C-7
Charging Dock Installation
• Lift up the charging post to the upright
position.
Fig.C-8
• Press hard to fix the charging post firmly on the
dock.
Fig.C-9
• For easy storage, pull up the charging post and
then press down.
Fig.C-10
19