Cleaning Mode Selection; Auto Mode; Dry Mode - Tineco CARPET ONE PRO Serie Manual De Uso

Cleaning Mode Selection

AUTO Mode

MAX Mode

DRY Mode

• In AUTO mode, the iLoop sensor automatically detects
how dirty the carpet is and applies the appropriate
volume of water spray.
• A red dirt monitoring loop indicates more dirt is
detected, and a blue loop indicates less dirt is detected.
This mode automatically provides the best cleaning
solution.
• In AUTO mode, press the
mode.
• The iLoop only displays the dirty amount, and the spray
volume keeps at the maximum of "100".
• In MAX mode, press the
In DRY mode, the dry level will change with the humidity
detected by the humidity sensor.
• Press the button to switch to AUTO mode.
35
button to enter MAX
button to enter DRY mode.