Product Operation; Remote Control - brondell Swash CL2200 Manual Del Propietário

PRODUCT OPERATION

Remote Control

1. Battery Installation and Remote Pairing
a. Insert 3 AAA batteries (included) into the
remote within 5 minutes of plugging the
seat into a GFCI outlet.
b. After inserting batteries, a blue light on
the remote will turn on.
c. Press any button within 5 seconds
before light turns off. A melody will play
to confirm remote pairing.
d. Repeat the process if the remote did not
pair.
2. Mount remote (optional)
a. Locate a place in the bathroom to
mount the remote so that it is visible and
reachable from the toilet.
b. Peel the tape backing off the back of the
remote mount; securely press the mount
to the location to ensure it does not fall
and damage the remote control.
c. Place the remote control into the mount.
16
14
15
6
2
3
1
11
7
8
13
4
5
9
10
12