Barazza 1PIDC30N Manual De Instalacion Y Uso página 23

egg timer) are suspended, moreover the booster
function and heat-up automatic is stopped.
To activate this function press C, all displays (L
zone) show //. To de activate press C and arbitrary
other key within 10 sec.
• Recall function:
This feature enables recovering power levels
and timer settings after the cooktop has been
switched OFF unintendedly. For example, the
cooktop has just been switched off, the user can
switch the cooktop ON again via the ON/OFF key
(A key) within 6 sec. Then the Pause symbol will
flash for 6 sec., now the user have to touch the
Pause symbol (C key), at this point the Recall
function becomes active. All power levels, timers
and heat-up automatics set before are recovered.
• Control Lock key :
Key lock is a functionality intended to lock the
keys during the cooktop is in operation or in pause
state. This is useful for cleaning purposes as the
touch control is unable to differentiate a wet cloth
from a finger. When the cooktop is switched ON,
the user can touch the Key Lock (B key) for 1 sec.,
and all keys except the key Lock and ON/OFF
are locked. When the key lock is active, press-
ing all the unlit keys (all except ON/OFF and Key
Lock) will result in a reject tone. To deactivate the
key lock, touch the Key Lock again, at this point
the cooktop can be operated regularly.
• Child Lock key :
This function is useful to protect the cooktop
against unintended operation, for example by
children. If locked, the cooktop may be turned ON,
but no cooking zone, heating level or timer may
be selected. To active this function, the user have
to power the cooktop ON, touch and hold L zone
for an arbitrary cooking zone for 3 seconds, slide
the H zone, from 0 to 9. This sequence must be
finished within 10 seconds. The display shows L
for active childlock. To disable the function: power
the cooktop ON, touch and hold L zone for 3 sec.,
then slide the H zone from 9 to 0 within 10 sec.
Now the child lock key is de.activated.
• Bridge function
(avaible just for the octa zones):
Bridging of 2 cooking zones is the connection of
2 single cooking zones, so they can be controlled
and will behave as one large cooking zone. This
enables using cookware which has a larger bot-
tom surface than a single cooking zone. To active
this function, the user have to touch both cook-
ing zone's simultaneously (L zone), in this way
the cooking zones are bridged, and one display
shows , and the other the power level. To disa-
ble the bridge, the user have to touch both cook-
ing zone's simultaneously. In this way, the cooking
zones are split into 2 separate zones again.
• Heat-up Automatic:
Heat-up automatic is a feature which enables
heating up a cold pot with full heating power and
returning automatically to the desireed cooking
level. The time during the cooking zone is heated
with full power is depending on the selected cook-
ing level. To active the Heat up automatic, you
have to hold continuous the desired cooking level
(H zone) for at least 3 sec, the display shows
To disable this function, touch and hold the cook-
ing zone command (L zone) for 3 sec. or select as
smaller cooking level.
Cooking
level
1
2
3
4
5
6
7
8
9
P
23
.
Heat-up
Automatic time
(sec)
48
144
230
312
408
120
168
216
not avaible
not avaible
EN