Checks To Be Carried Out Before Connecting The Machine - Master Trimmers MT Dry 200 Manual De Uso Y Mantenimiento

Finally, connect one end of the power cable to the connector provided on the motor unit support and the other
D
end to the electricity supply.
¡IMPORTANT!
Make sure that the electrical cable is perfectly positioned, without forming loops that could cause
tripping.

10.2. Checks to be carried out before connecting the machine

A series of necessary checks are described below before connecting the equipment to the electrical current and
starting work:
• Check that the motor support is fastened to the back plate of the equipment and that the knob locks into position,
as shown in the following picture.
• Check that the barrel is fixed to the motor shaft preventing it from being removed when pulled off.
• Check that the lid is correctly positioned on the barrel.
• Check that the plastic tray is placed on the bottom of the equipment.
• Check that the blade is in tensioned mode, as shown in the following picture.
23
www.masterproducts.es