Master Trimmers MT Dry 200 Manual De Uso Y Mantenimiento página 25

Front
Product downloading
¡IMPORTANT!
To download the product into the equipment, it is essential that the machine is stopped and
disconnected from the power supply.
First of all, it is necessary to remove the barrel plug and connect the machine to the power supply. Then, with one
hand, hold the machine by the rear handle and lift it slightly. With the other hand, press the power switch and let
the machine run until the product slides along the barrel and comes out of the it completely.
Rear
Tensioning / Untensioning of the blade
The machine is equipped with a simple mechanism that allows the cutting blade to be tightened or loosened. This
consists of a lever with a spring-loaded positioner and a fixed part that acts as a mechanical stop.
The tensioned position is the position in which the lever with the spring positioner is on the right side of the mecha-
nical stop, as shown in the following image.
25
www.masterproducts.es