Safety Instructions - oneConcept Blitzeis Manual De Instrucciones

EN
14

SAFETY INSTRUCTIONS

• Remove the packaging and make sure that no part has been damaged during
transport. If any parts are damaged, contact customer service immediately.
• Children could injure themselves on the packaging materials and old devices.
Therefore, dispose of the packaging material immediately.
• Children from the age of 8 years and mentally, sensory and physically
impaired persons may only use the device if they have been informed in detail
about the functions and safety precautions by a supervisor responsible for
them beforehand and understand the associated risks.
• Check the voltage on the product label before use. Ensure that you only
connect the device to sockets with the appropriate voltage.
• Only use the device for its intended purpose as described in the operating
instructions.
• Follow the instructions carefully when assembling. An incorrect procedure can
lead to irreparable damage to the unit.
• Switch off the device and remove the plug from the socket before cleaning the
device or when you are no longer using it.
• If the device is not working properly, switch it off immediately and contact a
specialist company in your area.
• If the power cord is damaged, it must be replaced by the manufacturer, an
authorised specialist company or a similarly qualified person.
• Do not connect the unit to multiple sockets.
• Do not use an extension cable.
• Do not connect the device to timers or remote-controlled sockets.
• Do not use or store the device near heat sources such as heaters.
• Never immerse the device or the plug in water or other liquids. If water leaks
on it, unplug the appliance immediately and have it checked by a specialist
company.
• When you use the appliance for the first time, remove all foils and packaging
material.
• Do not pull the plug out of the socket by the cable; instead, hold it securely
with your hand while unplugging it.
• Before inserting the plug into the socket, make sure that the device is
switched off.
• Do not stretch out the mains cable.
• Make sure that all air inlets and outlets are free and not covered so that the
unit does not overheat.
• Make sure that the power cord does not come into contact with sharp edges
or surfaces.