Klarfit Ease Delux Manual De Instrucciones página 27

Step 6: Putting on the heat massage pad
Place the heat massage pad (1) on the back cushion (2). To do this, pull 2 straps
through the upper hole and 2 straps through the lower hole.
The control element (45) can be stored within easy reach in the Velcro pocket
on the back pad.
Note: Make sure that the mains cable is not pushed through the inversion
bench. Make sure that all nuts, bolts and screws are fully tightened before
use.
Control unit points
downwards
Hole above
Hole below
EN
27