Assembly Instructions Actuators; Assembly Instructions For Hydraulic Actuator (Suitable For Ri821-Ri823-Ri825-Ri827) - Moretti Mopedia MUEVO Ri821 Manual De Instrucciones

5. Position and Fix the Handle on the column with the provided screws (Fig.6)
FIG.4
(image for illustrative purpose only)
6. Position and fix the slingbar wjth the provived screw on the corresponding
holed bracket (Fig.7)
7a. Fit the pedal for base legs opening and block it with the provided screw.
(Fig.8a –for RI823-RI824-RI827-RI828 model)
7a. Fit the lever for base legs opening and block it with the provided screw.
(Fig.8b – for RI821-RI822-RI825-RI826 model)
8. The structure will be completely assembled. Now install the electrical or hydraulic
kit for lifting suitable for the model chosen.
FIG.7
(image for illustrative purpose only)

11. ASSEMBLY INSTRUCTIONS ACTUATORS

11.1 Assembly instructions for hydraulic actuator (suitable for RI821-RI823-RI825-RI827)

FIG.9
(image for illustrative purpose only)
FIG.5a FIG.5b
1. Place the hydraulic actuator as in the picture, blocking well
its upper and lower part by auto-blocking screws and bolts.
(Fig.9)
FIG.6
FIG.8a
7
FIG.8b