Furrion VISION S FOS07TASR Manual De Usuario página 16

Install and Use Monitor
2. Press to increase volume or press
decrease volume.
Auto Dim Setting
1. Use / to highlight the AUTO DIM
menu, then press
2. Use / to select
Press to confirm your selection or press
to return to the previous page.
Press or to enable or disable the light
detect function.
CCD-0005559 Rev: 04-29-22
to enter it.
or .
to LCD Auto Off Setting
1. Use /
OFF menu, then press
2. Press /
as 10 SEC, 20 SEC, 30 SEC or
Press to confirm your selection or press
to return to the previous page.
Motion Detect Setting
When this function is enabled while
the monitor is off, it will turn on again
automatically after any motion is detected by
the camera.
1. Use /
DETECT menu, then press
- 16 -
to highlight the LCD AUTO
to enter it.
to set the LCD auto off time
to highlight the MOTION
to enter it.
(off).