Cleaning, Maintenance And Storage; Technical Data; Disposal; Ec-Declaration Of Conformity - Batavia BT-CWL003 Manual De Usuario

• Level 2 (50%) 5 hours
• Level 3 (75%) 3.5 hours
• Level 4 (100%) 2.5 hours
6. Cleaning, maintenance and
storage
Cleaning
6.1
Clean the machine regularly with a damp
cloth and a little mild soap. Do not use
cleaning agents or solvents; these may
damage the plastic parts of the machine.
Make sure that no water can get into the
inside of the machine.
Maintenance
6.2
There are no serviceable parts inside the
machine.
Storage
6.3
Store the unit and accessories in a dark, dry
and frost-free place.

7. Technical data

Voltage input . . . . . . . . . . . . . . 18 V
Work light . . . . . . . . . . . . . . . 15 W LED
Lumen. . . . . . . . . . . . . . . Max 1800 lm
Rotating angle . . . . . . . . . . . . 0° – 360°
Swivel angle . . . . . . . . . . . . . 0° – 180°
Measurements. . . . . . 15 × 23.1 × 18.2 cm
Weight: . . . . . . . . . . . . . . . . . . 1.1 kg

8. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as such
can either be reused or can be fed back into
the raw material cycle. The electric power
tool and its accessories are made from
various materials such as metals and
plastics. Take defective components to a
special refuse collection point. Ask about
these at your specialist shop or local council.
Batteries
8.1
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do
not dispose of batteries with domestic refuse.
Do not dispose of by burning, risk of explosion.

9. EC-Declaration of conformity

We, the Batavia B.V., Weth.
Wassebaliestraat 6d, NL-7951 SN
Staphorst, declare by our own responsibility
that the product Cordless LED Work light,
Item-No 7064212, Model Nr. BT-CWL003
is according to the basic requirements,
which are defined in the European
Directives Electromagnetic Compatibility
2014/30/EU (EMC), 2006/42/EC
(Machinery), RoHS: 2011/65/EU and their
amendments. For the evaluation of
conformity, the following harmonized
standards were consulted:
EN IEC 55015:2019+A11:2020;
EN 61547:2009;
AfPS GS 2014:01 PAK
Staphorst, 22 April 2022
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
English
5