Moretti ARDEA MOBILITY VIRGO Manual De Instrucciones página 37

10
5. Insert the joystick support into the housing bracket
on the armrest and tighten the knob after adjusting
the depth according to need
6. Connect the electric cable to the joystick, making
sure to secure it to the armrest using the specific
metal tabs present
N.B. The length of the cable allows the seat to rotate on both sides. The excess cable may be
placed underneath the seat
7. Remove the three pressure rivets on the front fairing
and on the rear fairing, by pressing on the rivets with
a fine-pointed tool
8. Lift the front and rear fairing and extract them
upwards