Moretti ARDEA MOBILITY VIRGO Manual De Instrucciones página 39

12
3. Armrest inclination
1. Lift the armrest
2. Unscrew the locking bolt of the armrest stop screw
and find the right adjustment of its height
3. Tighten the locking screw
4. Reposition the armrest
4. Headrest height
1. Keep the button pressed down during adjustment
2. Find the right adjustment, then release the button
5. Backrest inclination
1. Fold the backrest onto the seat
2. Unscrew the locking nut of the rear stop screw of the
backrest
3. Adjust the length of the stop screw and tighten the
bolt. This operation must be performed on both sides
6. Seat rotation
1. Raise the lever indicated in the figure
2. Rotate the seat in a clockwise or anti-clockwise
direction
3. Release the lever when the desired position is found
N.B. Do not rotate the seat through more than a 90° angle, to prevent crushing and/or
deformation of the electric cable connected to it