K
Preparations before use
■ How to install filters
Be sure to install the filter before plugging in.
Turn the product on its side to remove
the front panel
• Lift the both sides of the lower part of the front
panel to remove.
Remove the prefilter
• Pull the claws (two parts) in the upper side to
remove.
• Then pull the claws (two parts) in the lower side to
remove.
Prefilter
10
Remove the activated carbon filter and
dust collection filter from the plastic bag
Dust collection filter
● The filters are put in the plastic bag to retain their
quality. Remove them from the bag before using.
Install the dust collection filter
• The direction of the arrow of the filter must be the
same as the front panel side.
※ If not the dust collection function may not work
properly.
• Fill out the date of usage (the date when you
opened the bag) with a magic marker.
Front panel side
Front panel side
AP45-M
Activated
carbon filter