Electrical Connection; Wire Connection Diagram - Furrion FCR10DCBTA-BL Manual De Instrucciones

Electrical Connection

The 12V power supply wiring should incorporate a general main switch that enables
all pole disconnection of the 12V appliances from the 12V power supply source.
This refrigerator should be properly grounded for your safety.
This refrigerator requires 10.5-17VDC,>=15A power source for normal operating.
Direct connection with AC power source is forbidden. If doing so, it will void any
product warranty.
This refrigerator is designed for DC power input only, if you do not have ,recommend
Power Center (FCVSWC42A and FCVSWC54A), Lithium battery (FB12I10C) to match
with it.
The cord should be secured behind the refrigerator and not left exposed or dangling
to prevent accidental injury. If needed, please use strain relief to hold it. You should
follow the instruction of strain relief to install it.

Wire Connection Diagram

Power Input: DC12V(10.5-17V)
Current: 20A MAX
+ -
GND
1. Connect the "+" terminal with Positive pole of 12V DC.
2. Connect the "-" terminal with Negative pole of 12V DC.
3. GND should be connected to the converter ground or bus ground correctly.
9
CCD-0005596 REV: 10.12.2022
WARNING
WARNING
Power Input: DC12V(10.5-17V)
Current: 20A MAX
+ -
GND
1 2 3