Tabla de contenido
Publicidad
8. Operating instruction
8.1 Auto modus:
Click 'Auto' on the LED-Touch panel or on the App to start auto sensing and cleaning. This modus
is automatically turned on after powering on the device.
Notice:
Please click "Auto" on the panel or on the App to close auto sensing, if you have kittens
Ø
less than 1kg or the cat is pregnant. Then click "Clean" by your hand according to the actual
use of the machine.
If you are using litter that clumps quickly, you can adjust the "cleaning wait time" in the
Ø
App, such as 1 minute, to clean the litter as quickly as possible and reduce the smell. If you
are a multi-cat family, you can adjust the "cleaning interval" in the App, for example 30
minutes, to avoid repeated ineffective cleaning of the product.
If the cat enters the bin for more than 10 seconds, the cat is judged to have potty behavior.
Ø
After the cat leaves for 3 minutes, the automatic cleaning procedure will be performed.
(The default interval between cleanups is 15 minutes to prevent the product from being
started too frequently during multiple cats use. If the machine doesn't work after your
second cat pees, it may because the interval these two pees is less than 15 minutes.)
The button on the App cannot be closed/opened or synchronized with the panel
Ø
temporarily, please check the network status or re-configure the network, or click the
corresponding button on the App and repeat once or twice.
- 22
Publicidad
Tabla de contenido
