PETLUX Premium PL-012 Manual De Usuario página 23

8.2 Clean modus:
Click 'Clean' on the LED-Touch panel or on the App to start cleaning immediately.
During the clearing process, all keys are suspended. If you need to perform other
Ø
functions, please wait until the clearing process is complete.
Prolong the waiting time for cleaning in phone App when the cat has diarrhea, to allow
Ø
the cat litter to take enough time to clump and reduce the pollution of soft feces to the
ball bin.
If you have restarted the machine, the waiting time of "Clean" procedure will be restored
Ø
to the default value 3 minutes, which can be reset in the APP if necessary. (setting range:
0 to 60 minutes)
Prolong the interval time between two clearings when you have multiple cats, to prevent
Ø
repeated cleaning of products.
If you have restarted the machine, the interval time between two clearings will be
Ø
restored to the default value 15 minutes, which can be reset in the APP if
necessary.(setting range: 0 to 120 minutes)
8.3 Add litter:
Method 1:
Add litter in working modus. In "Auto" mode, when the added cat litter is more than 1kg, the
"Auto" will flash. After 30 minutes, the cat litter will be automatically smoothed, and the weight
will be automatically calibrated. If you think 30 minutes is too long to wait, please long press the
"Remove Odor" button for 2 or more seconds. The sand will be smoothed immediately, and the
weight will be calibrated immediately.
Method 2:
Power off the machine, add litter, then power it on again.
Notice:
The machine won't stop when it is smoothing sand even cat enters in at this moment. But
Ø
don't worry. The machine only swings in some angles, this swing won't hurt cat. (Besides
this situation, the machine has protection function. It will stop immediately once cat walks
close to the entrance during clearing.)
Please make sure the height of the sand is between MIN line and MAX line after adding. If
Ø
not, please adjust it with method 2.
You can find the sand surface correction option on the App to adjust the position of the
Ø
sand. (In grade 0, the sand surface is tilted to the right, and in grade 6, the sand surface is
tilted to the left.)
- 23