Tabla de contenido
Publicidad
8.4 Replace litter:
Replace the garbage bag with an empty one to avoid overflow in the garbage bag; Make
①
sure the rest sand inside the machine is close to MIN line (to avoid the overflow when
the bin rotates);
Press "Replace Litter" for 2 seconds, then wait the machine to clear the remaining sand;
②
(about 3 minutes)
Replace the garbage bag with an empty one again after clearing sand;
③
Notice:
√
Click "Replace Litter" again to cancel if you click it by mistake or if you find you have forgot to
replace the garbage bag first.
For fine mineral sand, when to replace the bag（step 1）, to avoid the overflow of
Ø
mineral sand from the mouth of the bag, you can firstly press "Clean" for 2 seconds; then
the litter bin will rotate 90° counterclockwise to ensure that the mouth of the bag is
upward
when
8.5 Remove Odor:
Method 1:
Click "Remove Odor" on the panel or click "Odorless" on your phone App.
Method 2
Set regular work on your phone App.
Notice:
The machine will remove odor automatically for 30 minutes after every clearing.
Ø
It will stop automatically once cat enters in, continue to work after cat leave.
Ø
replacing.
After
- 24
bag
replacement,
repeat
2
and
3.
Publicidad
Tabla de contenido
