ACCESSORIES
Dough hooks (5) – Stirring and kneading
heavy doughs, for example bread and yeast
doughs
Whisks (6) – Mixing and stirring foodstuffs
or liquids, for example sponge mixtures,
eggs, cream.
Holder for the inserts (4) – Dough hooks
and whisks can be inserted in the holder.
The holder is placed in the mount for the
inserts (7) (see cover picture).
USE
Please Note!
■ Inspect the device for damage each
time before you use it. Only use it if it
is undamaged and has been correctly
assembled!
■ Each time before you replace the inserts,
switch off the device and pull the mains
plug out of the plug socket.
■ Use the device for no more than 5 min-
utes without interruption to prevent over-
heating. Allow the device to cool down
before using it again.
The device is equipped with overload protec-
tion; the device switches off if it is overload-
ed. In this case, pull the mains plug out of
the plug socket and allow the device to cool
down for approx. 10 minutes. The device is
then ready to be used again.
1. Place the inserts you want (5 or 6) into
the mounts (7) on the device. You must
hear and feel them engage.
2. Fully unwind the connecting cable and
connect it to a plug socket.
3. Place the food you want into a suitable
mixing container.
4. Hold the inserts in the mixing container
(Picture C) and only then switch on the
12
device by pushing the controller (9) to
the right.
5. Select the speed level you want:
○ Level 1 – slow stirring, ideal for slowly
folding / stirring in fl our, beaten egg
white etc.
○ Level 2 – gentle mixing and stirring,
ideal for sauces etc.
○ Level 3 – medium mixing and stirring,
ideal for sponge mixtures, pancake
mixture, for example
○ Level 4 – vigorous stirring and
kneading, ideal for heavy doughs, for
example bread and yeast doughs
○ Level 5 – mixing and whisking, ideal
for light foodstuffs or liquids, for exam-
ple eggs, egg white, cream
○ In addition, for a short period of
vigorous mixing and beating the Turbo
function can be switched on: To do
this, hold down the TURBO button (10).
Use the Turbo function for no more
than 2 minutes so that the device is
not overloaded.
6. To switch off the device, move the con-
troller to the 0 position.
7. Wait until the inserts have come to a
complete standstill. Only then should you
remove them from the mixing container
and place the device down on the kitchen
unit.
8. Clean the used inserts immediately after
each use to prevent germ formation (see
the "Cleaning and Storage" chapter). Do
not allow any food residues to dry on.