Goodyear GY 750CT Instrucciones De Montaje página 25

English
Owner´s manual
•
forbidden to make turns on inclined roads to avoid accidents such as vehicle rollback, skidding or
overturning.
• If the view is not clear or the road is narrow, and the driving environment is poor, such as steep and
bumpy roads, follow the inducer's directions, do a good job of confirming safety before driving.
Loading instructions
• Do not overload. The amount of load must not exceed the maximum that the minidumper can support.
• Proper loading. To prevent the load from being uneven and causing the vehicle to tilt, place the goods
evenly and secure them with ropes. Attention should also be paid to the loading height to ensure line of
sight.
• If you are driving on an unstable surface, such as a wooden bridge, make sure it can support the sum of
the weight of the vehicle plus the load it is carrying, and drive carefully within the specified speed.
• Pay attention to the weight limit and especially to the weight of the load on sloping terrain. Observe
these instructions:
• It is forbidden to perform tilting operations on inclined fields. Do not tilt the cab on inclined areas, as
this may cause the vehicle to overturn. If necessary, the vehicle body must be leveled.
Parking instructions
• Do not park in dangerous places. Choose parking on hard ground, not in dangerous or unstable places.
• It is strictly forbidden to inspect and repair machinery when the cab is in the raised state.
• The wheels must be stationary when stopping on a slope.
During maintenance
• The engine should be stopped while performing maintenance and adjustments to the machine.
• Wait for the engine and vehicle to cool down before performing maintenance.
• During engine maintenance, it is strictly forbidden to approach sources of heat or fire.
Inclination
From 0º to 15º
From 15º to 25º
More than 25º
Load weight
Maximum 750 kg
No-load circuit
Do not drive
25