Power Cord; Recycling - NDS Zerowire G2 Instrucciones

2.2

Power Cord

Use the supplied hospital grade power cord with the correct plug for your power source.
en
• The power cord is the only recognized disconnect device for this product. To power off the product, dis-
connect the power cord from the AC mains.
• If the device is wall mounted, disconnect the wall mount power adapter to power off the product.
• The product and other medical equipment should be positioned so that the power cord and connection to
AC mains is readily accessible.
• If an extension cord or power strip is needed for connection of this product to AC mains, confirm that the
power cord plug can be securely connected to the cord or power strip.
• This product should be powered from a center tapped circuit when used in the US at voltages over
120 volts.
2.3

Recycling

Follow local governing ordinances and recycling plans regarding the recycling or disposal of this
equipment.
10 | Safety Information