Technical Specifications; Getting Started; Setting Time - Emos E0121 Guia De Inicio Rapido

GB | Thermometer

Technical specifications:

Quartz clock
indoor temperature: 0 °C to +50 °C, 0.1 °C resolution
outdoor temperature: -40 °C to +60 °C, 0.1 °C resolution
indoor humidity: 25 % to 95 % RH, 1 % resolution
temperature measurement accuracy: ±1 °C
humidity measurement accuracy: ±5 %
temperature display unit: °C/°F
wired probe length: 2.9 m
power supply: 1× 1.5 V AAA battery
Description of the Main Unit (See Fig. 1)
1 – MEMORY button
2 – ADJ button
3 – MODE button
4 – alarm clock icon
5 – time display
6 – indoor temperature and
humidity

Getting Started

1. Remove the battery cover on the back of the device.
2. Insert a single 1.5 V AAA battery. Make sure to observe the
correct polarity of the batteries according to the drawing at the
bottom of the battery compartment. Use 1.5 V alkaline batteries
only. Do not use 1.2 V rechargeable batteries.
3. Close the battery compartment.
4. If the screen is difficult to read, change the batteries in the
thermometer.

Setting Time

1. Long-press the MODE button.
2. Press the ADJ button repeatedly to adjust minutes and hours
(holding the button speeds up adjustment).
3. Use the MODE button to navigate between the values.
7 – outdoor temperature
8 – SNOOZE button
9 – °C/°F button
10 – CLEAR button
11 – stand
12 – wired probe
4