Machine Installation - Oster OS-WD1800 Manual De Instrucciones

M A C HI NE I NST A LLA T I ON
1-2. Loosen the screw of the left or right bottom angle just as
the picture shown.
3. Use the screw to fix the bracket on the left or right bottom
angle of the water dispenser.
4. Make a hole on the floor´s or the desk´s surface where the
water dispenser will be installed.
5. Fix the bracket on the floor by screw tightly.
6. Tighten the screw.
Warning: To avoid a hazard due to stability of the appliance, it must be fixed in
accordance with the instructions.
English-8