Warranty And Liability; Safety Inspection; Markings On The Device; Disposal - Fronius Acctiva Seller Manual De Instrucciones

Ocultar thumbs Ver también para Acctiva Seller:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
impossible to guarantee that bought-in parts are designed and manufactured to
meet the demands made on them, or that they satisfy safety requirements.
Modifications, installations or conversions are only permitted with the approval
of the manufacturer.
Warranty and
The warranty period for the charger is 2 years from the date of invoice.
liability
However, the manufacturer will not accept any liability if the damage was caused
by one or more of the following:
-
-
-
-
-
-
Safety inspec-
The manufacturer recommends that a safety inspection of the device is perfor-
tion
med at least once every 12 months.
The safety inspection may only be performed by an appropriately qualified
electrician
-
-
-
-
For safety inspections, follow the appropriate national and international stan-
dards and directives.
Further details on safety inspections can be obtained from your service centre.
They will provide you on request with any documents you may require.
Markings on the
Devices with the CE marking satisfy the essential requirements of the applicable
device
guidelines.
Devices displaying the EAC mark of conformity satisfy the requirements of the
relevant standards in Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
Devices displaying the CP mark of conformity satisfy the requirements of the re-
levant standards in Morocco.

Disposal

Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally-friendly way, in accordance with the European Di-
rective and national legislation. Used equipment must be returned to the distri-
butor or disposed of via an approved local collection and disposal facility. Cor-
rect disposal of used equipment promotes the sustainable recycling of material
resources. Failing to dispose of used equipment correctly can lead to adverse he-
alth and/or environmental impacts.
Packaging materials
Separate collection according to material. Check your local authority regulations.
Crush containers to reduce size.
Use of the charger "not in accordance with the intended purpose"
Improper installation and operation.
Operating the charger with faulty protection devices.
Non-compliance with the operating instructions.
Unauthorised modifications to the charger.
Catastrophes caused by the activities of third parties and force majeure.
After any changes have been made
After any additional parts are installed, or after any conversions
After repair, care and maintenance are carried out
At least every twelve months
39

Publicidad

Tabla de contenido
loading

Tabla de contenido